2×4×8' end wall studs cut to fit 2×4×7' end wall studs cut to fit For a rollup door, header opening to exact size 6'×7' Rollup door will have an opening of 72"×84" 2×4 studs and 2×4×8' nailer cut to fit 2×4 studs and nailers cut to fit 2×8' or 2×10' cut to fit Cut one full 48"×96" sheet of siding into four 12"×96" piecesPlace two 4'×8' sheets of wall sheathing face down sidebyside on a level surface Place the back wall frame on the sheathing, as shown in figure 4 Trace the back wall frame on the sheathing, remove frame and cut along the lines Properly place sheathing on the frame and nail into place using 6d nails every 8" on centerSeparate all lumber, hardware, etc into individual stacks of like items Unfold each frame, setting aside two frames to be used as end walls From 1×4 pine boards, cut gusset plates 6" long • 24 for a 12' building • 32 for a 16' building • 40 for a ' building Apply gusset plates on each side of the top and bottom fold locations
Menards Spring Is In The Air With 11 Off Everything Milled